General Boiler Company, Inc.

GE - BOILER/GENERATOR MODEL – GE-12 to GE-180 XL ADDITIONAL EQUIPMENT:

Boiler water feed equipment is needed for the operation of the boiler/generator.

Specify the proper water feed devices for the particular need. Order w/ models as follows:

 (Std. 0-100 PSI Systems Listed here).                                                        PLEASE ASK FOR PRICES

LOW PRESSURE LINE FEED      (ALL MODELS). 120 Volts GE-12-180 S-LP 1 $     

                Used only on boilers 0-50 PSI operating when the water line pressure

                Is greater at least 15 PSI than the boiler operating pressure.

                Includes solenoid, strainer and check valve.

HI-PRESSURE LINE FEED 120 Volts. GE-12-180

            Used on boiler systems of 0-100 PSI operating pressure                           SP-HP 11 $     

            Features feed pump&motor, solenoid, strainer and check valve.

CONDENSATE RETURN/MAKE-UP TANK WATER SYSTEM  

120V.System). Hi & Low Pressure

Complete tank w/float assembly and feed pump&motor, strainer,

Stop valve to pump & check valve.( SEE: Compact mountings on page 1for frame and piping).

15 GL. Tank with 1/3 HP pump&motor for models GE-12-72                                   TP-HP 20 $

25 GL. Tank with 1/3 HP pump&motor for models GE-100-180                              TP-HP 21 $

CODE A.S.M.E. BLOWDOWN TANKS

Coded ASME Blowdown tank sized for Models GE-12-72                                 BDT-ASME 30 $ 

Coded ASME Blowdown tank sized for models GE-100-180                             BDT-ASME 31 $

NON-Code Blowdown tank for GE12-72 List                    $            and for GE-1010-180           $

OTHER EQUIPMENT FOR BOILERS (OPTIONAL).

1" Automatic/Electric Blowdown valve w/ timer and time of day GE-12 -180        BD-AT 100 $

Extra pressure control and manual switch to operate on 50% power GE-48-180

                                P.Switch     100 PSI                                                                                             $ 

                                P.Switch     150 PSI                                                                                               $

TRANSFORMERS (Step-down transf.120V. Controls from primary main Power) Installed:

.25 KVA for boilers with solenoid feed mod. GE-12-72                                                    TRAN 250 $

.50KVA for boilers " " " GE-100-180                                                                                 TRAN 500 $

1.5KVA for boilers with 1/3^rd & ½ HP motor & pump GE-12-180                                  TRAN 1500 $

SOLID STATE PROGRESSIVE Sequencer w/proportional pressure operating

(optional requirement on larger boilers GE-100 and larger). GE-100-180                 STEP CT 100    $

SECOND LOW-WATER CUTOFF W/ MANUAL RESET:

Required: California, Texas, Washington, Iowa, Massachusetts, Nevada

North Carolina, Arizona. Consult Factory for other requirements in other States.

Electronic Auxiliary low-water cutoff control wired to boiler system.GE-24-180: SEC.LLCO INCLUDED

Also needed in States which have adopted the ASME CSD-1 Controls.

(Note that other Companies charge up to $800.- for the sec.LLCO and CSD1 compliance)

CSD-1 Controls: All our boilers meet ASME CSD-1, order: CSD-1 (Specify):      INCLUDED

Secondary HI-LIMIT Pressure control: Standard installed on all  models:      INCLUDED

Vacuum breaker installed on all units w/o solenoid feed.

OPTIONAL Air bleed valve installed on boilers of 30 psi or less add          $ 75.00 List.

E-mail:  generalblr  @  sbcglobal.net

 file: blr ele-feed-100 2001-02

BACK TO SPECS        ELECTRIC BOILERS